Laptop HP Nw 8440

2007-07-06T12:17:23Z

Zkyez:

Salut,

In randurile de mai jos va voi povesti despre experientele mele sexuale cu un laptop HP Nw 8440 si linux.

In primul rand configuratia hardware:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600]
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
02:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21)
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

florin@samflorin-laptop:~$ cat /proc/cpuinfo |grep -i model
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz

Pentru animalul de mai sus, va recomand un kernel cel putin 2.6.19 datorita unor buguri de "bad state" (a se vedea https://bugzilla.novell.com/show_bug.cgi?id=179702 ).
La acest model rezolvarea problemei a fost un kernel update,urmat de un upgrade de bios de pe pagina producatorului.

Distributia curenta pe acest model e Ubuntu 7.04 "Feisty Fawn". In timpul instalarii veti avea surpriza ca interfata grafica sa nu porneasca. Workaround: instalati cu installerul in mod text sau din consola live-cd-ului sa dati sudo apt-get update; sudo apt-get install xorg-driver-fglrx; sudo aticonfig --initial si /etc/init.d/gdm restart (gdm poate fi inlocuit de xdm/kdm).

Dupa instalare, activarea "Multiverse" si aducerea la zi a pachetelor, pentru rezolvarea diverselor probleme de suspend2disk/suspend2ram (vezi sudo pmi capabilities) am editat astfel /etc/default/acpi-support:

--------Cut here-------------

# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true

# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true

# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem

# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded
# unless they're listed in MODULES_WHITELIST
MODULES="ipw3945 sbp2 ohci1394 ieee1394"

# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST="fglrx"

# Should we save and restore state using the VESA BIOS Extensions?
SAVE_VBE_STATE=false

# The file that we use to save the vbestate
VBESTATE=/var/lib/acpi-support/vbestate

# Should we attempt to warm-boot the video hardware on resume?
POST_VIDEO=false

# Save and restore video state?
# SAVE_VIDEO_PCI_STATE=true

# Should we switch the screen off with DPMS on suspend?
USE_DPMS=false

# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true

# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
DOUBLE_CONSOLE_SWITCH=false

# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown

# Comment this out to disable screen locking on resume
LOCK_SCREEN=true

# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true

# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true

# Add services to this list to stop them before suspend and restart them in
# the resume process.
STOP_SERVICES="mysql "

# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false

# Switch to laptop-mode on battery power - off by default as it causes odd
# hangs on some machines
ENABLE_LAPTOP_MODE=true

--------End Here-----------

Continutul /etc/apt/sources.list :

----------Cut Here------------
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.

deb http://ro.archive.ubuntu.com/ubuntu/ feisty main restricted
deb-src http://ro.archive.ubuntu.com/ubuntu/ feisty main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://ro.archive.ubuntu.com/ubuntu/ feisty-updates main restricted
deb-src http://ro.archive.ubuntu.com/ubuntu/ feisty-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://ro.archive.ubuntu.com/ubuntu/ feisty universe
deb-src http://ro.archive.ubuntu.com/ubuntu/ feisty universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://ro.archive.ubuntu.com/ubuntu/ feisty multiverse
deb-src http://ro.archive.ubuntu.com/ubuntu/ feisty multiverse

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful featurro.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://ro.archive.ubuntu.com/ubuntu/ feisty-backports main restricted universe multiverse
# deb-src http://ro.archive.ubuntu.com/ubuntu/ feisty-backports main restricted universe multiverse

deb http://security.ubuntu.com/ubuntu feisty-security main restricted
deb-src http://security.ubuntu.com/ubuntu feisty-security main restricted
deb http://security.ubuntu.com/ubuntu feisty-security universe
deb-src http://security.ubuntu.com/ubuntu feisty-security universe
deb http://security.ubuntu.com/ubuntu feisty-security multiverse
deb-src http://security.ubuntu.com/ubuntu feisty-security multiverse
## Medibuntu - Ubuntu 7.04 "feisty fawn" (Video codecs: win32codecs/restricted formats)
## Please report any bug on https://launchpad.net/products/medibuntu/+bugs
deb http://medibuntu.sos-sts.com/repo/ feisty free non-free
deb-src http://medibuntu.sos-sts.com/repo/ feisty free non-free
#Qbittorrent
deb http://hydr0g3n.free.fr/qbittorrent/feisty/ ./
deb-src http://hydr0g3n.free.fr/qbittorrent/feisty/ ./
#VirtualBox
deb http://www.virtualbox.org/debian feisty non-free
#wine
deb http://wine.budgetdedicated.com/apt feisty main
#Xgl-Compiz
deb http://beryl.xglusers.de/ubuntu.beryl-project.org/ feisty main
#avant
deb http://download.tuxfamily.org/syzygy42 feisty avant-window-navigator
#Pidgin
deb http://repository.debuntu.org/ feisty multiverse
deb-src http://repository.debuntu.org/ feisty multiverse

-----End Here---------

Deoarece xgl din feisty are unele probleme de functionare, in /etc/apt/preferences am adaugat urmatoarele:

------Cut here------
Package: *
Pin: release o=lupine
Pin-Priority: 1000
----End here------

pentru a prefera pachetele din repository-ul beryl.

Am adaugat in /etc/modules urmatoarele linii:

---------Cut here-----------
cpufreq_conservative
cpufreq_ondemand
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
acpi-cpufreq
---------End here-----------

si am dezactivat powernowd din sysv-rc-conf (sudo apt-get install sysv-rc-conf) deoarece procesorul este unul intel,
iar power management e asigurat de laptop-mode-tools.

Continutul /etc/laptop-mode/laptop-mode.conf

-----Cut here-------
###############################################################################
#
# Configuration for Laptop Mode Tools
# -----------------------------------
#
# There is a "system" to the configuration setting names:
# CONTROL_something=0/1 Determines whether Laptop Mode Tools controls
# something
# LM_something=value Value of "something" when laptop mode is active
# NOLM_something=value Value of "something" when laptop mode is NOT active
# AC_something=value Value of "something" when the computer is running
# on AC power
# BATT_something=value Value of "something when the computer is running on
# battery power
#
# There can be combinations of LM_/NOLM_ and AC_/BATT_ prefixes, but the
# available prefixes are different for each setting. The available ones are
# documented in the manual page, laptop-mode.conf(8). If there is no LM_/NOLM_
# in a setting name, then the value is used independently of laptop mode state,
# and similarly, if there is no AC_/BATT_, then the value is used independently
# of power state.
#
# Some options only work on ACPI systems. They are marked ACPI-ONLY.
#
# Note that this configuration file is a fragment of bash shell script: you
# can use all the features of the bash scripting language to achieve your
# desired configuration.
###############################################################################

###############################################################################
# Configuration debugging
# -----------------------
###############################################################################

# Set this to 1 if you want to see a lot of information when you start/stop
# laptop_mode.
VERBOSE_OUTPUT=0

###############################################################################
# When to enable laptop mode
# --------------------------
#
# "Laptop mode" is the mode in which laptop mode tools makes the computer
# consume less power. This includes the kernel "laptop_mode" feature, which
# allows your hard drives to spin down, as well as various other settings which
# can be tweaked by laptop mode tools. You can enable or disable all of these
# settings using the CONTROL_... options further down in this config file.
###############################################################################

# Enable laptop mode when on battery power.
ENABLE_LAPTOP_MODE_ON_BATTERY=1

# Enable laptop mode when on AC power.
ENABLE_LAPTOP_MODE_ON_AC=1

# Enable laptop mode when the laptop's lid is closed, even when we're on AC
# power? (ACPI-ONLY)
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=1

###############################################################################
# When to enable data loss sensitive features
# -------------------------------------------
#
# When data loss sensitive features are disabled, laptop mode tools acts as if
# laptop mode were disabled, for those features only.
#
# Data loss sensitive features include:
# - laptop_mode (i.e., delayed writes)
# - hard drive write cache
#
# All of the options that follow can be set to 0 in order to prevent laptop
# mode tools from using them to stop data loss sensitive features. Use this
# when you have a battery that reports the wrong information, that confuses
# laptop mode tools.
#
# Disabling data loss sensitive features is ACPI-ONLY.
###############################################################################

# Disable all data loss sensitive features when the battery level (in % of the
# battery capacity) reaches this value.
MINIMUM_BATTERY_CHARGE_PERCENT=3

# Disable data loss sensitive features when the battery reports its state
# as "critical".
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1

###############################################################################
# Controlled hard drives and partitions
# -------------------------------------
#
# For spinning down your hard drives, laptop mode will remount file systems and
# adjust hard drive spindown timeouts. These parameters specify which
# devices and partitions are affected by laptop mode.
###############################################################################

# The drives that laptop mode controls.
# Separate them by a space, e.g. HD="/dev/hda /dev/hdb". The default is a
# wildcard, which will get you all your IDE and SCSI/SATA drives.
HD="/dev/[hs]d[abcdefgh]"

# The partitions (or mount points) that laptop mode controls.
# Separate the values by spaces. Use "auto" to indicate all partitions on drives
# listed in HD. You can add things to "auto", e.g. "auto /dev/hdc3". You can
# also specify mount points, e.g. "/mnt/data".
PARTITIONS="auto /dev/mapper/*"

# If this is enabled, laptop mode tools will assume that SCSI drives are really
# SATA drives that only _look_ like SCSI drives, and will use hdparm to control
# them. Set this to 0 if you have /dev/sd devices and you want laptop mode
# tools to use the "sdparm" command to control them.
ASSUME_SCSI_IS_SATA=1

###############################################################################
# Hard drive behaviour settings
# -----------------------------
#
# These settings specify how laptop mode tools will adjust the various
# parameters of your hard drives and file systems.
###############################################################################

# Maximum time, in seconds, of work that you are prepared to lose when your
# system crashes or power runs out. This is the maximum time that Laptop Mode
# will keep unsaved data waiting in memory before spinning up your hard drive.
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360

# Should laptop mode tools control readahead?
CONTROL_READAHEAD=1

# Read-ahead, in kilobytes. You can spin down the disk while playing MP3/OGG
# by setting the disk readahead to a reasonable size, e.g. 3072 (3 MB).
# Effectively, the disk will read a complete MP3 at once, and will then spin
# down while the MP3/OGG is playing. Don't set this too high, because the
# readahead is applied to _all_ files that are read from disk.
LM_READAHEAD=3072
NOLM_READAHEAD=128

# Should laptop mode tools add the "noatime" option to the mount options when
# laptop mode is enabled?
CONTROL_NOATIME=1

# Should laptop mode tools control the hard drive idle timeout settings?
CONTROL_HD_IDLE_TIMEOUT=1

# Idle timeout values. (hdparm -S)
# Default is 2 hours on AC (NOLM_HD_IDLE_TIMEOUT_SECONDS=7200) and 20 seconds
# for battery and for AC with laptop mode on.
LM_AC_HD_IDLE_TIMEOUT_SECONDS=7200
LM_BATT_HD_IDLE_TIMEOUT_SECONDS=20
NOLM_HD_IDLE_TIMEOUT_SECONDS=7200

# Should laptop mode tools control the hard drive power management settings?
CONTROL_HD_POWERMGMT=1

# Power management for HD (hdparm -B values)
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=255
NOLM_AC_HD_POWERMGMT=255

# Should laptop mode tools control the hard drive write cache settings?
CONTROL_HD_WRITECACHE=1

# Write cache settings for HD (hdparm -W values)
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=1
LM_HD_WRITECACHE=1

###############################################################################
# CPU frequency scaling and throttling
# ------------------------------------
#
# Laptop mode tools can automatically adjust your kernel CPU frequency
# settings. This includes upper and lower limits and scaling governors.
# There is also support for CPU throttling, on systems that don't support
# frequency scaling.
#
# This feature only works on 2.6 kernels.
###############################################################################

# Should laptop mode tools control the maximum CPU frequency?
CONTROL_CPU_FREQUENCY=1

# Legal values are "slowest" for the slowest speed that your
# CPU is able to operate at, "fastest" for the fastest speed,
# "medium" for some value in the middle, or any value listed in
# /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies.
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=powersave
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=powersave
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=powersave

# Should laptop mode tools control the CPU throttling? This is only useful
# on processors that don't have frequency scaling.
# (Only works when you have /proc/acpi/processor/CPU*/throttling.)
CONTROL_CPU_THROTTLING=0

# Legal values are "maximum" for the maximum (slowest) throttling level,
# "minimum" for minimum (fastest) throttling level, "medium" for a value
# somewhere in the middle (this is usually 50% for P4s), or any value listed
# in /proc/acpi/processor/CPU*/throttling. Be careful when using "maximum":
# this may be _very_ slow (in fact, with P4s it slows down the processor
# by a factor 8).
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=medium
NOLM_AC_CPU_THROTTLING=minimum

###############################################################################
# Syslog configuration control
# ----------------------------
#
# Syslog daemons have a tendency to sync their log files when entries are
# written to them. This causes disks to spin up, which is not very nice when
# you're trying to save power. The syslog.conf can be tweaked to *not* sync
# a given file, by prepending the log file name with a dash, like this:
#
# mail.* -/var/log/mail/mail.log
#
# Using the following options, you can let laptop mode switch between
# different syslog configurations depending on whether you are working on
# battery or on AC power. To set this up, start by configuring these options
# for your syslog daemon, and then run lm-syslog-setup to create the various
# files. Then edit the laptop mode-specific syslog configuration files to
# remove the syncs only when laptop mode is active.
###############################################################################

# Should laptop mode tools control which syslog.conf should be used?
CONTROL_SYSLOG_CONF=0

# Laptop mode tools controls syslog.conf by replacing /etc/syslog.conf (or
# whatever you specify in SYSLOG_CONF) by a link to the files configured here.
# NOTE: these files are NOT created by default, and if they do not
# exist this feature will not work. You can run the script
# /usr/sbin/lm-syslog-setup to set things up.
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf

# Signal this program when syslog.conf has been replaced.
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd

# This is the syslog configuration file that should be replaced by a link to the
# other files.
SYSLOG_CONF=/etc/syslog.conf

###############################################################################
# X display settings
# ------------------
#
# Using these settings, you can let laptop mode tools control the X display
# standby timeouts.
###############################################################################

# Should laptop mode tools control DPMS standby settings for X displays?
CONTROL_DPMS_STANDBY=0

# These settings specify the standby timeout for the X display,
# in seconds. The suspend and poweroff timeouts are somewhat
# larger values derived from these values.
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200

###############################################################################
# Terminal settings
# -----------------
#
# Using these settings, you can let laptop mode tools control the terminal
# blanking timeouts.
###############################################################################

# Should laptop mode tools control terminal blanking settings?
CONTROL_TERMINAL=0

# These settings specify the blanking and powerdown timeouts. Note that
# the powerdown timeout is counted from the moment the screen is blanked,
# i.e. BLANK_MINUTES=2 and POWERDOWN_MINUTES=5 means the screen powers
# down after 7 minutes of inactivity. The range for all these settings is
# 1 to 60 minutes, or 0 to disable.
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50

###############################################################################
# Auto-hibernation settings
# -------------------------
#
# Using these settings, you can make laptop mode tools automatically put your
# computer into hibernation when the battery level goes critically low.
#
# This feature only works on ACPI, and only works on computers whose batteries
# give off battery events often enough.
###############################################################################

# Should laptop mode tools perform auto-hibernation?
ENABLE_AUTO_HIBERNATION=0

# The hibernation command that is to be executed when auto-hibernation
# is triggered.
HIBERNATE_COMMAND=/usr/sbin/hibernate

# Auto-hibernation battery level threshold, in percentage of the battery's
# total capacity.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=6

# Enable this to auto-hibernate if the battery reports that its level is
# "critical".
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=5

###############################################################################
# Start/Stop Programs settings
# ----------------------------
#
# Laptop mode tools can automatically start and stop programs when entering
# various power modes. Put scripts accepting "start" and "stop" parameters
# in the directories /etc/laptop-mode/batt-stop, batt-start, lm-ac-stop,
# lm-ac-start, nolm-ac-stop and nolm-ac-start. Laptop mode will call the
# scripts in a state-"stop" directory with the "stop" parameter when entering
# the state in question, and it will call the same scripts with the "start"
# parameter when leaving the state. Scripts in a state-"start" directory are
# called with the "start" parameter when the specified state is entered, and
# with the "stop" parameter when the specified state is left.
###############################################################################

# Should laptop mode start and stop programs?
CONTROL_START_STOP=1

###############################################################################
# Settings you probably don't want to touch
# -----------------------------------------
#
# It is usually not necessary to change these parameters. They are included
# for completeness' sake.
###############################################################################

# Change mount options on partitions in PARTITIONS? You don't really want to
# disable this. If you do, then your hard drives will probably not spin down
# anymore.
CONTROL_MOUNT_OPTIONS=1

# Dirty synchronous ratio. At this percentage of dirty pages the process
# which calls write() does its own writeback.
LM_DIRTY_RATIO=60
NOLM_DIRTY_RATIO=40

# Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been
# exceeded, the kernel will wake pdflush which will then reduce the amount
# of dirty memory to dirty_background_ratio. Set this nice and low, so once
# some writeout has commenced, we do a lot of it.
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10

# kernel default settings -- don't touch these unless you know what you're
# doing.
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
DEF_MAX_AGE=30

# This must be adjusted manually to the value of HZ in the running kernel
# on 2.4, until the XFS people change their 2.4 external interfaces to work in
# centisecs. This can be automated, but it's a work in progress that still
# needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
# external interfaces, and that is currently always set to 100. So you don't
# need to change this on 2.6.
XFS_HZ=100

# Seconds laptop mode has to to wait after the disk goes idle before doing
# a sync.
LM_SECONDS_BEFORE_SYNC=2
------_End here---------------

Datorita unui bug in kernelele <2.6.22, urmatoarele scripturi (cu permisiuni de exec) au trebuit adaugate in /etc/acpi/{resume/suspend}.d
---Cut here---
florin@samflorin-laptop:/etc/acpi/suspend.d$ cat 20-i8042-input.sh
#!/bin/sh

# Unbind the AT keyboard interface.
if [ -f /sys/bus/platform/drivers/i8042/unbind ]; then
echo -n "i8042" > /sys/bus/platform/drivers/i8042/unbind
fi
----End here---

---Cut here----
florin@samflorin-laptop:/etc/acpi/suspend.d$ cat ../resume.d/80-i8042-input.sh
#!/bin/sh

# Rebind the AT keyboard interface.
if [ -f /sys/bus/platform/drivers/i8042/bind ]; then
echo -n "i8042" > /sys/bus/platform/drivers/i8042/bind
fi
-------End here---------

Deoarece la suspend de foarte multe ori nu mi s-a mai activat partitia de swap, am modificat /etc/fstab si am trecut partitia de swap cu
/dev/sdaX in loc de #UUID=97f25d87-fef3-41e1-82b1-3458e93d31e4 none swap sw 0 0

si am adaugat in /etc/acpi/resume.d/99-custom.sh urmatoarele:

-----Cut here----
/sbin/swapoff -a
/sbin/swapon -a
----End here---

Scripturi pentru power management (battery mode / ac mode):

florin@samflorin-laptop:/etc/acpi/battery.d$ls
10-vm_settings.sh 15-anacron.sh 20-wireless_power.sh 80-battery.sh 90-ati.sh
florin@samflorin-laptop:/etc/acpi/battery.d$ cat 10-vm_settings.sh
#!/bin/bash
# Tweak virtual memory to conserve power when running on batteries.

echo 10 > /proc/sys/vm/swappiness
echo 0 > /proc/sys/vm/dirty_expire_centisecs
echo 0 > /proc/sys/vm/dirty_writeback_centisecs
echo 60 > /proc/sys/vm/dirty_background_ratio
echo 95 > /proc/sys/vm/dirty_ratio
florin@samflorin-laptop:/etc/acpi/battery.d$ cat 20-wireless_power.sh
#!/bin/bash
# Change the wireless power mode to Battery.

for x in $(/bin/ls -d /sys/class/net/*/wireless | /usr/bin/cut -d'/' -f5); do
/sbin/iwpriv $x set_power 7
done
florin@samflorin-laptop:/etc/acpi/battery.d$ cat 90-ati.sh
#!/bin/bash
#Dirty hack, i know
. /usr/share/acpi-support/power-funcs

new_state=1
su - florin -c"DISPLAY=:0 /usr/bin/aticonfig --set-powerstate=$new_state"

In /etc/acpi.d am adaugat urmatoarele:

florin@samflorin-laptop:/etc/acpi/ac.d$ cat 10-vm_settings.sh
#!/bin/bash
# Tweak virtual memory for running on AC.

echo 60 > /proc/sys/vm/swappiness
echo 3000 > /proc/sys/vm/dirty_expire_centisecs
echo 500 > /proc/sys/vm/dirty_writeback_centisecs
echo 10 > /proc/sys/vm/dirty_background_ratio
echo 40 > /proc/sys/vm/dirty_ratio
florin@samflorin-laptop:/etc/acpi/ac.d$ cat 20-wireless_power.sh
#!/bin/bash
# Change the wireless power mode to AC.
# This should work for most chipsets

for x in $(/bin/ls -d /sys/class/net/*/wireless | /usr/bin/cut -d'/' -f5); do
/sbin/iwpriv $x set_power 6
done
florin@samflorin-laptop:/etc/acpi/ac.d$ cat 80-ac.sh
#!/bin/bash

for x in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "ondemand" > $x
X=${x%/*}
# The second column is the second from the highest freq most power savings / least slowdown
awk '{print $2}' $X/scaling_available_frequencies > $X/scaling_max_freq
done
florin@samflorin-laptop:/etc/acpi/ac.d$ cat 90-ati.sh
#!/bin/sh
. /usr/share/acpi-support/power-funcs

new_state=1
su - florin -c"DISPLAY=:0 /usr/bin/aticonfig --set-powerstate=$new_state"

De asemenea, in /etc/laptop-mode/batt-stop exista urmatoarele symlinkuri:

florin@samflorin-laptop:/etc/laptop-mode/batt-stop$ ls -als
total 8
4 drwxr-xr-x 2 root root 4096 2007-07-05 00:00 .
4 drwxr-xr-x 8 root root 4096 2007-04-15 14:55 ..
0 lrwxrwxrwx 1 root root 19 2007-07-04 23:59 anacron -> /etc/init.d/anacron
0 lrwxrwxrwx 1 root root 15 2007-07-04 23:59 atd -> /etc/init.d/atd
0 lrwxrwxrwx 1 root root 16 2007-07-04 23:59 cron -> /etc/init.d/cron
0 lrwxrwxrwx 1 root root 18 2007-07-04 23:59 cupsys -> /etc/init.d/cupsys
0 lrwxrwxrwx 1 root root 17 2007-07-05 00:00 hplip -> /etc/init.d/hplip
0 lrwxrwxrwx 1 root root 17 2007-07-05 00:00 samba -> /etc/init.d/samba

respectiv serviciile care sunt oprite in battery mode.

Momentan atat, revin cu eventuale completari.

Wiki.lug.ro - Contribuții utilizator [ro]

Laptop HP Nw 8440